Prior to downloading you should contact Artwork and request the following information:
In order for us to generate license strings you need to provide us your machine's ID. This is best done by downloading the lmtools.zip utility and running it on your machine. Use the System Settings tab and copy the Ethernet Address and Disk Volume Serial Number that it displays. See below:
I would like to evaluate your OASIS to Gerber program. Please send me the FTP login, the install password and temporary key strings for my machine.
I got my Ethernet (physical address) by using the lmtools utility provided above.
Ethernet address = 00560abE72
Reason for Evaluation
I intend to use the program to view and plot Gerber data.
International Harvesting and IC Design
10087 Champion Way Bldg 43
Topeka Kansas 09323
Tel (450) 132-2213 Fax (450) 132-2113
Windows 64 bit
v1.30 18 MB
v1.29 9/5/2017 8 MB
Artwork's FTP site requires a login and password to gain access. This information will be provided to you with the license strings.
If after clicking on the link you get a This Page Cannot be Displayed error, this may be due to Internet Explorer's problems accessing password protected FTP servers. In that case, please review the possible fixes on our support page.
291KB zipped. 710KB after uncompressing. Unzip this to v8_lmtools.exe. Run this on your computer; click on the SYSTEM tab and copy both your machine's ethernet address and also the disk serial number. For some laptops, locking the software to the Disk serial number is preferable to the ethernet address.