Downloading ASM 550 Mentor to DXF TranslatorYou can download the programs for evaluation or update. Download the appropriate version and then send us an email identifying yourself. We'll email you back the unzipping password and program activation codes. See the sample below:
|
Dear Steve or Hagai I would like to evaluate your men2dxf program on HPUX 9.06. I've already picked it off your ftp site along with the manuals. Please send me temporary key strings for: hostid = 20056789ab hostname = bogusboy I plan to use the program to move data from Boardstation to my vendor who cuts adhesive heat sinks with a laser and wants DXF. Thanks much, John Boy john_boy@toolshed.ihicd.com International Harvesting and PCB Design 10087 Champion Way Bldg 43 Topeka Kansas 09323 Tel (450) 132-2213 Fax (450) 132-2113 |
|
The executable file name includes the platform info and version. Please make
sure you pick up the correct binary for your machine. All packages contain
both directions of the translator and also the Ample code for BoardStation
integration.
Windows NT
|
DocumentationThe complete manual is available in Adobe's PDF format which can be viewed online and printed using the Adobe Acrobat Reader version 3.0.
|
 You can get the Acrobat Reader free from Adobe's site. for a variety of platforms including Windows, Sun, HP, IBM, SGI etc...
|
Chapter 1
|
Introduction |
|
Chapter 2
|
Installation |
|
Chapter 3
|
Running MEN2DXF |
|
Chapter 4
|
Running DXF2MEN |
|
Chapter 5
|
The Mentor Ample GUI |
|
Appendix I
|
Technical Support |
UnzippingThe release is zipped using a shareware version of unzip that supports passwords. If your version of unzip does not support passwords please download the one available below:
|
zip_sunos.tar [504K] | zip_hp700.tar [368K] | zip_solaris.tar [380K] | zip_aix.tar [259K] |
|
untar it into your /usr/local/bin or somewhere in your PATH. Once installed in your PATH you can simply use it by typing: unzip filename This program is compatible with PKZIP compression used on PCs.
|
