To download the STL2GBR software click on the appropriate installation package. Then send us an email requesting an installation password and key codes. (Please include your full company details and the application -- otherwise we will not issue evaluation codes.)

If you already own a license you need only get the installation password. You can continue to use your existing license strings.

Dear Steve or Hagai

I would like to evaluate your STL2GBR program on Windows

I downloaded stl2gbr.win32.v123.exe off your ftp site.
I ran the v8_lmtools.exe utility and got the following
disk serial number:

56ab3800

I plan to use the program to convert my microwave board 
designs done in SolidWorks into Gerber stream.

Thanks much,

John Boy  
International Harvesting and IC Design
10087 Champion Way Bldg 43
Topeka Kansas 09323
Tel (450) 132-2213
Fax (450) 132-2113
john_boy@toolshed.ihicd.com

In order for us to generate license strings you need to provide us your machine's ID. This is best done by downloading the lmtools.zip utility and running it on your machine. Use the System Settings tab and copy the Ethernet Address and Disk Volume Serial Number that it displays. See below:

Problems Accessing our FTP Site

Artwork's FTP site requires a login and password to gain access. This information will be provided to you with the license strings.

If after clicking on the link you get a This Page Cannot be Displayed error, this may be due to Internet Explorer's problems accessing password protected FTP servers. In that case, please review the possible fixes on our support page.